Sony SupportFDR-X1000VR

RM-LVR2 System Software for Mac

    Applicable Models
    About this download
    System Requirements
    File Info
    Preparation
    Download & Install

    IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

    This information is for the following models:

    • RM-LVR2

    About this download

    Benefits and improvements

    This utility updates the system firmware for Mac® OS and provides the following benefits:
    • Adds the "Loop recording" mode to the shooting mode setting
      Note: Only available with compatible cameras
      (includes FDR-X1000V and HDR-AS200V as of March 6, 2015)
    • Adds the following features to the camera setting:
      • White balance setting
      • AE shift setting
      • Audio recording setting
      • Wind noise reduction setting
      • Loop recording interval setting
      Note: Only available with compatible cameras
      (includes FDR-X1000V and HDR-AS200V as of March 6, 2015)
    • Adds the Image quality setting
      Note: Only available with compatible cameras
      (includes FDR-X1000V as of March 6, 2015)
    • Adds the Movie format setting
      Note: Only available with compatible cameras
      (includes FDR-X1000V as of March 6, 2015)
    • Adds changes for the Date and Time/area/daylight saving time setting
    • Adds changes to the Time zone for some areas

    Please view this Operating Guide for information on how to use the new functions provided by firmware update version 2.00.

    System Requirements

    Operating Systems

    • Mac OS® X

    File Info

    File Name

    • Update_RMLVR2V2.dmg

    File Version

    • 2.00

    File Size

    • 83.94 MB

    Release Date

    • 03-05-2015

    Before You Start

    Determine if Your Device Needs the Update

    This update is only for RM-LVR2V2 devices that currently have firmware versions lower than 2.00.
    If your device firmware version is 2.00 or higher, this update is not necessary.


    1. On the RM-LVR2V2 device, press the MENU button, select the (Remote Control Settings) icon, and then press the REC/ENTER button.
    2. From the Settings screen, select the (Version) icon, and then press the REC/ENTER button.
    3. If version 2.00 is displayed, your device does not need this update.
      Note: If "Ver. 1.00" is not displayed, please download and install the firmware update.

      Version Screen

    Important Notes

    • IMPORTANT: This utility is only for use with the Sony® RM-LVR2V2 Live View Remote. Do not install this utility with any other model.
    • WARNING!: This firmware update and any changes incurred by it are permanent. It is not possible to return to a previous firmware version after updating this firmware. By continuing this update process and downloading and updating this firmware, you acknowledge that you are aware and understand that this update cannot be reversed.
    • This update process requires the following items for proper updating:
      • A computer with:
        • CPU: Intel® processor
          Note: Core™ Solo and Core Duo processors are not supported.
        • Available Hard Disk Space: 200 MB or more
        • Installed Memory (RAM): 512 MB or more
        • A USB port.
        • Mac OS® X version 10.7 - 10.11.

        • IMPORTANT: For OS X version 10.10 or 10.11, please ensure the Mac OS Driver Loader has been installed before continuing to update your firmware.

      • Device power supply:
        • This update can only be performed when the remaining battery level has four bars Battery Indicater or more. When performing the firmware update, it's recommended to use a fully charged battery pack.
          WARNING!: The device may not operate properly if the power is interrupted during the update.
      • USB cable:
        • Use only the USB cable supplied with the device.
          IMPORTANT: Update functionality is not guaranteed with any other USB cable.
    • To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
    • It is highly recommended that you print out these instructions for use as a reference during the installation process.
    • Please view this Operating Instructions Supplement for information on the added or modifies functions.

    Download & Install

    Download and Update the Firmware

    1. Download the Update_RMLVR2V2.dmg file to a temporary or download directory (please note this directory for reference).
    2. Go to the directory where the file was downloaded and double-click the Update_RMLVR2V2.dmg file.
      Note: Do not connect the device to the computer until instructed.
    3. Double-click the "Firmware Updater" Firmware Updater Icon icon.
    4. At the Password prompt screen, enter the Name and Password for the administrative account, and then click "OK".

      Password Prompt Screen

      Note: If the pop-up message "FirmwareUpdater can�t be opened because the identity of the developer cannot be confirmed" appears, click "OK" and perform the following procedure.

      Firmware Updater Error

      While pressing the "Control" key, click the "Firmware Updater" Firmware Updater Icon icon and select "Open" in the menu.

      Firmware Updater Error Menu Open

      When the pop-up message appears again, click "Open".

      Firmware Updater Error
    5. Power on the device.
    6. Connect the device to your computer using the supplied USB cable. On the LCD of the device, "USB Mode" will appear.
    7. At the "Firmware Updater" screen, click "Next".

      Connect the Device Screen
      WARNING!: Do not power off the device or disconnect the USB cable until the update process is complete.
    8. When the updater recognizes the device connection, the next "Firmware Updater" screen is displayed on the computer, and the device screen displays the following image.

      Device Connection Screen
    9. At the "Firmware Updater" screen, click "Next".

      Check the Version Screen
    10. When the following screen is displayed, check the version number at the lower left.

      Current Version Screen
      If the current version is lower than 2.00, click "Next".
      Note: If the current version is "2.00 or higher", your device does not need this update. Stop the USB connection and click "Finish". Then power off the device and then back on again.

    11. WARNING!: Do not disconnect the USB cable from the device or the computer during the update process.
    12. Reset the device.
      To reset the device, press the REC/ENTER button on the device.

      Device REC/ENTER Button Screen
      Note: The screen will turn off after pressing the REC/ENTER button. Please continue to the next step.
    13. At the "Firmware Updater" screen, click "Next".

      Click Next Screen
    14. After resetting, reconnection of the device is verified, when the following screen is displayed, click "Run".
      Note: The update process takes about ten minutes to complete.

      Run the Update Screen
      WARNING!: Do not power off the device or disconnect the USB cable until the update process is complete.
    15. When the following screen is displayed, click "Finish".

      Update Complete Screen
    16. You may now disconnect the USB cable.
    17. Power off the device and then back on again.

    Check the Firmware Version After Updating (optional)

    1. On the RM-LVR2V2 device, press the MENU button, select the (Remote Control Settings) icon, and then press the REC/ENTER button.
    2. From the Settings screen, select the (Version) icon, and then press the REC/ENTER button.
    3. If version 2.00 is displayed, the firmware update was successful.
      Note: If "Ver. 2.00" is not displayed, please download and install the firmware update again.

      Version Screen