Connecting via an access point

When you connect a camera that supports access point registration, Wi-Fi connection between the camera and Creators' App become possible via access points. Once connected via an access point, camera images can be imported to Creators' App and then uploaded to the cloud while your smartphone remains connected to the internet and without interrupting the Wi-Fi connection.

• See Supported cameras for a list of cameras that support access point registration.

Direct connection

The camera and Creators' App connect directly by Wi-Fi.
The connection between the camera and Creators' App is temporarily interrupted while images are being uploaded from Creators' App to the cloud.

Connection via an access point

The camera and Creators' App connect by Wi-Fi via the same access point (SSID).

• : smartphone operation
• : camera operation

1. Open the camera screen in Creators' App and select [Camera Settings] → [Network] → [Camera Wi-Fi settings].
   • Configure Wi-Fi settings on a camera that is already connected via Bluetooth connection. (This is separate from the smartphone settings.)
2. Based on what is displayed on the smartphone, perform one of the following operations.
   If [Are you sure to perform Camera Wi-Fi settings?] is displayed

   1. Follow the instructions displayed on the smartphone to transfer information to the camera about the access points registered on the smartphone.
   2. When a confirmation screen appears on the camera, select [OK].

   If access points appear on the [Camera Wi-Fi settings] screen

   1. Select the same access point the smartphone is connected to and enter the password as needed.
   2. When a confirmation screen appears on the camera, select [OK].
3. On the camera select MENU → (Network) → [Wi-Fi] → [Wi-Fi Connect] → [On].
   • Once a Wi-Fi connection is established between the access point and camera through this operation, the camera and Creators' App connect via the access point. When the process is complete, [Connected via Access Point] appears on the camera screen of Creators' App.

• From the second time onward, the devices connect via the access point if it is available. If not, a direct connection is established automatically.