Unable to turn on the 360 Spatial Sound Mapping

If you are unable to turn ON the 360 Spatial Sound Mapping feature, check the following:

• Follow the steps below if you have not completed an Auto Calibration:
  1. Select Setup → Speaker Settings → Auto Calibration Settings, then follow the on-screen instructions.
  2. After completing the Auto Calibration, set the 360 Spatial Sound Mapping feature to On.

  Hint: For details about the Auto Calibration function, refer to the AV receiver's product manual or Help Guide.

• The 360SSM setting can't be used if the Bluetooth Mode is set to Transmitter and the AV receiver is connected to a Bluetooth device.
• This setting can't be changed when headphones are connected to the AV receiver.
• Follow the steps below to choose a speaker pattern that matches your speaker configuration:
  1. Select Manual Speaker Settings.
  2. Select Speaker Pattern from the Speaker Settings menu.

• This setting is available when one of the following sound fields is selected:

  • Multi Stereo (except for 2-channel content)
  • A.F.D.
  • A.F.D. Movie
  • Audio Enhancer (except for 2-channel content)