Preset Radio Stations on the A/V Receiver

Applicable Product

IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

Before You Start

• Connect your A/V receiver directly to a compatible TV to use the on-screen menu.
• Use the arrows keys on your remote control to navigate the menu of your receiver.

  

Preset FM or AM Radio Stations

1. Connect the receiver to the TV through an HDMI® connection.

   HDMI connection to the TV

   Note:

   • The cables shown in the images aren't supplied. We recommend that you use a high quality HDMI cable.  Go to Parts and Accessories. 
   • If you prefer not to have your receiver connected to a TV or monitor, you can remove this connection after you complete the setup.
2. Power on the receiver and the TV.
3. Set the TV to the appropriate HDMI input.
4. On the receiver's remote control, press the HOME button.
5. Select Listen.

   

6. Select FM or AM.
7. Tune in to the desired station.
   Note: Select Tuning + to scan from lower to higher frequency stations, or select Tuning - to scan from higher to lower stations.

   

8. Select Preset Memory.

   

9. Select a preset number.

   

   Note: You can store up to 30 FM stations and 30 AM stations.

10. Repeat steps 1-7 to store another station.