The steps on how to reset the component Hi-Fi stereo system to factory settings vary depending on the model number of your stereo system. Select the appropriate steps below based on the model number of your stereo system.
If your model is not listed, check the manual on the support web page.
Note: The resetting procedure is in the Troubleshooting section of the Help Guide or Operating Instructions.
IMPORTANT:
- Use the buttons on the unit itself to perform the steps below.
- All user-configured settings, such as preset radio stations, Sleep Timer, pairing registration information, clock and network are reset to factory default setting.
CMT-SBT20, CMT-SBT20B
- Press the On/Standby button to turn on the system.
- At the same time, press and hold the FUNCTION and EJECT buttons until RESET appears on the display window.
CMT-SBT20, CMT-SBT20B
- Press the On/Standby button to turn on the system.
- At the same time, press and hold the FUNCTION and EJECT buttons until RESET appears on the display window.
CMT-SBT40D, CMT-X3CD
- Turn on the system.
- At the same time, press and hold the FUNCTION and EJECT buttons until RESET appears on the display window.
CMT-X5CDB
- Unplug the power cord and confirm that the STANDBY indicator is not lit. Then pluh back in the power cord and turn on the system.
- At the same time, press and hold the FUNCTION and ON/Standby buttons until RESET appears on the display window.
GTK-X1BT
- Unplug the power cord from the electrical wall outlet.
- Plug the power cord back into the electrical wall outlet.
- Press the ON/Standby button to turn on the system.
- While holding down the
STOP button, press the FUNCTION button for about 3 seconds.
GTK-XB5
- Unplug and plug back in the power cord, and then turn on the system.
- At the same time, press and hold the FUNCTIONPAIRING and the VOLUME - (minus) buttons for more than 5 seconds.
GTK-XB60, GTK-XB90
- Resetting the system
- Press the RESET switch on the back of the stereo system using a ball-point pen.
- Press the POWER button to turn the system back on.
Note: Pairing information is not deleted when you press RESET.
- Restoring the system to the factory default settings
- Press the
POWER button to turn on the system. - At the same time, press and hold the FUNCTIONPAIRING and the VOLUME - (minus) buttons for more than 5 seconds.
GTK-XB7
- Unplug and plug back in the power cord, and then turn on the system.
- At the same time, press and hold the FUNCTIONPAIRING and the VOLUME - (minus) buttons for more than 5 seconds.
GTK-XB72
- Press the POWER button to turn on the system.
- At the same time, press and hold the FUNCTIONPAIRING and the VOLUME - (minus) buttons on the system for more than 5 seconds.
MHC-V02, MHC-V21, MHC-V21D, MHC-V42D, MHC-V43D, MHC-V71, MHC-V71D, MHC-V72D, MHC-V73D, MHC-V81D, MHC-V82D, MHC-V83D
- Unplug the power cord from the system, then plug it back in.
- Press the POWER button to turn on the system.
- At the same time, press and hold the GUITAR and MEGA BASS buttons for about 3 seconds.
MHC-V11
- Unplug and plug back in the power cord, then turn on the system.
- At the same time, press and hold the STOP and Folder - (minus) buttons until RESET appears on the display window.
MHC-V13
- Unplug the power cord from the system, then plug it back in.
- Press the POWER button to turn on the system.
- At the same time, press and hold the GUITAR and MEGA BASS buttons for about 3 seconds.
