Updates of this version

• The following new features and improvements are available.
  1. Background processing EMO output function for HDR-SDR and 3D LUT conversion
  2. Side by Side left/right swap function during HDR-SDR conversion
  3. Free settings for EMO video when side by side
  4. HDR-SDR conversion during Quad View Display mode (HD only)
  5. Free settings for EMO (conversion output) video in Quad View (HD only)
  6. Single Link 4K/HD auto-sensing (adapted to SDI Input 1 or SDI Input 3)
  7. Interlaced display function
  8. Black Detail Mode for HDR
  9. Source ID display function

For further details, please refer to the Release Notes for "Release Notes for_PVM-X3200_X2400_X1800_V5_00.pdf".

Applicable version

PVM-X2400 Ver.1.04 or later

Note：

• The software version for the monitor can be found on the Unit Status of the Status menu.

Preparation

• You will need 1 USB memory stick for the installation.
  Specification: USB 3.0 up to 8GB, FAT32 format
  For more details, please read “Handling a USB memory stick” in the operating instructions of the PVM-X3200, PVM-X2400 and the PVM-X1800.

Note：

• You need to upgrade both the software and the FPGA.
  • In the case of Ver.2.00, this update procedure takes about 1 hour and 25 minutes per PVM-X3200/X2400/X1800 unit.
  • In the case of Ver.3.01 or later, this update procedure takes about 1 hour and 6 minutes per PVM-X3200/X2400/X1800 unit.

How to update

• Please refer to "Release Notes for_PVM-X3200_X2400_X1800_V5_00.pdf”.