The following benefits and improvements are also included in this update.

• Adds support for Mapping Mission, which allows you to create and execute mapping missions as automated flights
  • Allows you to create and modify missions in Airpeak Flight
  • Allows you to import flight area ranges in KML format via the Airpeak Base
• Adds advanced movement to Smart Obstacle Avoidance for more efficient obstacle avoidance. This function is accessible during Return to Home (RTH) or a preparation flight for a Timeline Mission, Direct Repeat Flight, or Mapping Mission
• Allows camera shooting events, including still images and videos, to be reproduced during Direct Repeat Flight
• Adds support for AF-Lock (focus lock) for the camera
• Adds support for the ILCE-7RM3A camera and can be used in combination with the GBL-T3 gimbal
• Device logs are now uploaded simultaneously with flight logs. You can disable this auto-upload function in Airpeak Flight
• Voice notifications (Japanese and English) are now available for some notifications in Airpeak Flight
• Adds enhanced safety measures during path flights where automated flights will pause in the following situations:
  • When the GNSS positioning error exceeds a specific value
    Note: This applies to both preparation flights and waiting at the starting point.
  • When the difference between the target position and the aircraft's position along the path exceeds a specific value
    Note: This applies to both preparation flights and waiting at the starting point.
  • When the landing gear is lowered
    Note: This applies even during the preparation flight.
  • When the obstacle brakes are operating continuously
• Adds judgment conditions when starting the motors
• Improves aircraft stability
• Fixes an issue where operating instruction delays may occur when communications are not stable
• Adds support for the RTK GNSS (Real-Time Kinematic Global Navigation Satellite System) receiver in the RTK-1 (RTK kit)
• Adds support for the LBP-HM1 battery pack
  Note: While using the LBP-HM1 battery pack some Flight mode settings are limited when selecting Vel (Velocity) or Alt (Altitude).
• Adds support for the GBL-PX1 gimbal
• Camera and gimbal setting changes or operations can now be made from the main controller in dual-operation mode
• Adds the ILCE-7RM5 camera and the GBL-PX1 gimbal as presets in the Main tuning of the Gimbal settings
• Adds support for synchronizing the date and time on a camera. When the aircraft receives GNSS signals with a mobile device connected, the date and time on the camera will be synchronized with those being received
• Adds support for Gimbal/Camera image stabilization (Video) in combination with the ILME-FX3 camera
• Enhances the Airpeak Flight UI:
  • The gimbal angle is now always displayed in the mobile app
  • The video type is now displayed for a short time on the main window when switching the camera screen view
  • The video type is now always displayed on the sub-window
• Improves the tracking accuracy for the gimbal angle displayed in Airpeak Flight and makes it display smoothly
• Improves the tracking accuracy for Mission Flight and Direct Repeat Flight
• Improves the FPV video quality in low-light situations
• Reduces operating instruction delays that may happen when communications are not stable
• Fixes an issue where auto take-off sometimes stops
• Improves usability during shooting:
  • Adds support for shutter sound notifications when shooting still images
  • Adds support for still image thumbnails
• Adds support for the Pre-flight check screen display to allow you to check remaining camera media and the configuration and state of the aircraft and remote controller before starting a flight, to ensure safety while flying
• Adds support for E-mount FE PZ 16-35 mm F4 G wide-angle power zoom lenses:
  • Adds a Main tuning preset in the Gimbal settings
  • Zoom can now be operated from the remote controller
• Adds Airplane mode to the main Gimbal control mode, which allows the main gimbal to follow the tilt of the aircraft dynamically so FPV drone-style footage can be captured
• Mission Flight has been improved:
  • Progress can now be displayed during Mission Flight
  • Adds support for resuming missions from a suspend point, even after stopping to change batteries
  • Adds a setting that points the nose of the aircraft in the direction of travel during Mission Flight
  • Adds a setting that returns the aircraft to its original flight path after a manual operation with the remote controller
  • Adds a feature that prevents the aircraft from getting too close to upright structures when shooting them during Mission Flight
  • When the flight path has been changed due to manual operation, the new flight path is now displayed
• Fixes an issue where the frame rate of videos would drop when transferred due to signal interference
• Improves the FPV gimbal angle display in Follow mode
• Improves geomagnetic anomaly notifications before and during flights
• Makes it so that Auto shooting won't occur when Camera directions and shooting is set to Manual
• Fixes an issue where, after changing the Obstacle brake setting using the Flight mode switch on the remote controller while the aircraft is turned off. The Obstacle brake appears to be ON or OFF in the Airpeak Flight app when the aircraft is reconnected but actually behaves in exactly the opposite manner until the Obstacle brake setting change is reflected.
• Supports the Direct Repeat Flight function
  • A path you flew before can be repeated immediately offline, without having to connect to the cloud
• Adds new camera settings such as the drive mode or the file format that can be controlled
  • In addition to the settings such as aperture value or shutter speed that can be controlled currently, more detailed camera settings such as the drive mode or the file format are now supported
    Note: The items that can be controlled differ depending on the camera model.
• Adds camera models that can use focus-related functions (displaying a focus frame, moving the focus point in some focus modes)
• Supports preview display for still images taken during a flight
  • Turning on Display still images taken as thumbnails in Display of the General settings displays thumbnails on the lower right of the screen when still images are taken during a flight
• Added the ILCE-7M4 as a preset in the Main tuning of the Gimbal settings
• The position or order on the flight screen of various functions of the Aircraft, Remote controller, Camera, or Gimbal can be changed by pressing and holding the side menu on the flight screen
• Supports the Remote ID function that broadcasts identification information via radio waves remotely
• Improves an issue where landing is sometimes unstable when the Vision Positioning function is disabled
• Fixes an issue where the autofocus is run again when pressing the shutter even when the focus is already set
• Fixes an issue where the Vision Positioning function is not enabled when the flight mode is set to Std (Speed), and where the Vision Positioning function is not disabled when the flight mode is set to Alt (Altitude)
• Improves video transmission quality when communication status is poor
• Improves the receiver sensitivity display in the controller signal strength display
• Adds a roll adjustment function to the Main control of the gimbal
• Improves the warnings displayed when the aircraft cannot fly in a low-temperature environment
• Improves the stability of the stereo camera calibration
• Improves the issue of the aircraft vibrating depending on how the gimbal and camera are installed
• Fixes an issue of Airpeak Flight not displaying the aircraft status correctly when operating manually during RTH (Return to Home)