WARNING! Performing a forced Factory data reset will remove all customized settings in the TV including downloaded apps, systems data, channels, and wireless network settings. For some models listed below, if you perform a forced Factory data reset, then the Demo data for retail will be erased from internal storage.
- 2021 models: XR X95J (65/75/85) series
- 2020 models: XBR A8H, X800H, X850H, X900H, X950H (49/85), X950H (55/65/75), Z8H, and Z9H series
- 2019 models: XBR Z9G, A9G, X850G (55/65/75/85), and X950G series
- 2018 models: XBR A9Fand Z9F series
This article can be used to perform a forced Factory data reset in situations when you can't perform a normal factory data reset, such as:
- when the software crashes after a firmware update.
- when the screen of the normal factory data reset doesn't open for some reason.
Before you start
- If you can access the TV menu, perform a factory data reset instead.
- A forced factory data reset can only be done on TVs with Android™ 6.0 Marshmallow operating system or higher installed.
- This procedure may require two people.
- The location of the buttons will vary depending on the TV model.
- Some applications data might be recovered if Apps are synced with your Google™ account. The steps to sync apps vary depending on the TV menu options.
- HOME → Settings → Device Preferences or Accounts & Sign-In → Google → Choose synced apps → Select items you want to sync with the account → Sync now.
- HOME → Settings → Google → Choose synced apps in Sync → Select the items you want to sync with the account → Sync now.
- HOME → Settings → Personal → Google → Choose synced apps in Sync → select the items you want to sync with the account → Sync now.
Perform a forced Factory data reset
First, determine the number of buttons on your TV:
- Only one button on the TV: The
(Power) button should be located on the bottom center or left side of the TV when viewed from the front. Note: If the power button is located on the side of your TV, you may need to remove the side cover to locate it.
- Three buttons on the TV: The buttons are located on either the right or left side of the TV, or the back, depending on your model.
If you can't find the buttons on the TV, refer to the TV
manuals
![]()
.
Follow the instructions according to the number of buttons on your TV.
Type A: Your TV model has only one button
- Unplug the TV AC power cord from the electrical socket.
- Press and hold the Power button on the TV (not on the remote), and then (while holding the button down) plug the AC power cord back in. Continue to hold the button down until the white LED light appears. It will take approximately 10-30 seconds for the LED light to turn white.
- Release the button after the white LED light appears. If the LED light doesn't turn white within 30 seconds, start from Step 1 again.
- Wait a few minutes for the forced Factory reset process to take place. The TV will reboot (turn on and off) twice. If the TV doesn't turn back ON automatically, press the Power button to turn the TV back ON.
- When the Welcome setup screen appears, perform the setup. If the Welcome setup screen doesn't appear, unplug the AC power cord and then plug it back in.
If the forced Factory data reset didn't resolve the issue, repeat the procedure again starting from Step 1.
Type B: Your TV model has three buttons
For models released in 2020: The buttons are located on the right or left side of the TV, depending on the model. The Down (-) button is directly below the Power button.
For models released in 2019 or earlier: When facing the back of your TV, the buttons are on the right. The Down (-) button is directly below the Power button.
For X74xxH_X75xxH Series:
- Unplug the TV's AC power cord from the electrical socket.
- Simultaneously press and hold down the Power and Volume
Down (-) buttons on the TV (not on the remote), and then (while holding the buttons down) plug the AC power cord back in. Continue to hold the buttons down until Erasing screen appears.
Note: It will take approximately 10-30 seconds for the Erasing screen to appear.
- Release the buttons after the Erasing screen appears.
Note: If the Erasing screen doesn't appear within 60 seconds, start from Step 1 again.
- Wait a few minutes for the Factory data reset process to take place. The TV will reboot (turn on and off).
Note: If the TV doesn't turn back ON automatically, press the Power button to turn the TV back ON.
- When the Welcome setup screen appears, perform the setup.
Note: If the Welcome setup screen doesn't appear, unplug the AC power cord and then plug it back in.
- If the forced Factory data reset didn't resolve the issue, repeat the procedure again starting from Step 1.
Other models
- Unplug the TV AC power cord from the electrical socket.
- Simultaneously press and hold down the Power and Volume Down (-) buttons on the TV (not on the remote), and then (while holding the buttons down) plug the AC power cord back in. Continue to hold the buttons down until the green (amber for some models) light appears.
Note: It takes approximately 10-30 seconds for the light to turn green (amber for some models).
- POWER button
- volume Down (-) button
- Rear of TV
- Release the buttons after the green LED light appears.
Note: If the white LED light doesn't turn green within 30 seconds, start from Step 1 again.
- Wait a few minutes for the forced Factory reset process to take place. The TV will reboot (turn on and off) twice.
Welcome setup screens will appear on the TV twice. Do NOT set up the first Welcome setup screen. The TV will auto Factory data reset within one minute of the first Welcome setup screen.
- For models released in 2019 or earlier: The Welcome setup screen will appear on the TV twice. Do NOT set up the first Welcome setup screen. The TV will auto Factory data reset within one minute of the first Welcome setup screen.
- If the TV doesn't turn back ON automatically, press the Power button to turn the TV back ON.
- When the Welcome setup screen appears, perform the setup.
- For models released in 2019 or earlier: Perform the setup when the second Welcome setup screen appears.
- If the Welcome setup screen doesn't appear, unplug the AC power cord and then plug it back in.
If the forced Factory data reset didn't resolve the issue, repeat the procedure again starting from Step 1.
