Sound Bar - Bluetooth

To connect a soundbar to the TV via Bluetooth®, you need to pair the soundbar with the TV.

Applicable products

TVs that can connect to Bluetooth audio devices are limited to Google TV™ and Android TV™ models that support the A2DP profile.
For additional details, refer to the following article:
Can I use Bluetooth headphones, speakers, and sound bars with Android TV?
 

Step 1: Set the soundbar to pairing mode

The pairing procedure varies depending on the model. Refer to the manual for model-specific information Manuals are posted on your model support page.

E.g. If the soundbar is HT-Z9F

1. Turn on the TV.
2. Prepare the remote control for the soundbar, and turn on the soundbar.
3. Point the remote control at the receiver in the soundbar's front panel display. Press and hold the (BLUETOOTH) button on the top of soundbar’s bar speaker and the (TV) button on the soundbar’s remote control at the same time for five seconds.
4. When the front panel display in the bar speaker displays BT and the Bluetooth indicator in the front panel display flashes quickly, the soundbar is in pairing mode.
   

E.g. If the soundbar is HT-X9000F/X8500

1. Turn on the TV.
2. Prepare the remote control for the soundbar, and turn on the soundbar.
3. Point the remote control at the receiver in the soundbar's front panel display. Press and hold the (BLUETOOTH) button on the top of soundbar’s bar speaker and the (TV) button or (INPUT) button (*) on the soundbar’s remote control at the same time for five seconds.
   * TV button for HT-X9000F, INPUT button for HT-X8500. For other models, refer to their manuals, as the button names and locations on the remote control vary depending on the model.
4. When the Bluetooth indicator on the bar speaker flashes quickly, the soundbar is in pairing mode.
   
   
    

Step 2: Pair the soundbar with the TV

NOTE: The procedure below describes an example using screens from Android™ 8.0. The screen menus vary depending on the Android OS. For details, refer to the Help Guide (Web manual).

1. Set the TV to pairing mode.
   
   1. Access the Sttings screen
      • If the remote control has a Quick Settings ( or ) button, press the Quick Settings button and select Settings.
      • If the remote control does not have a Quick Settings ( or ) button, press the HOME button and select Settings.
   2. The next steps will depend on your TV menu options:
      • Select Remotes and accessories → Pair accessory, and press the Enter button.
      • Select Remotes & Accessories → Bluetooth settings → Add device, and press the Enter button.
      • Select Bluetooth setting → Add device, and press the Enter button.
      
      This will set the TV to pairing mode.
      
      
2. Pair the soundbar with the TV.
   
   Set the soundbar in pairing mode and the TV within 1 meter of each other.
   
   
   When the TV detects the soundbar, the device name and status of the soundbar will be displayed at the upper right of the screen. Select it and press the Enter button.
   
   If the text under the device name changes to Paired and a message indicating that the Bluetooth connection is complete is displayed, pairing is complete.
   
   
   
   Check the connection status on the soundbar.
   
   

   E.g. If the soundbar is HT-Z9F

   
   If the front panel display in the bar speaker changes to TV (BT) and the Bluetooth indicator lights up in blue, pairing with the TV is complete.
   
   

   E.g. If the soundbar is HT-X9000F/X8500

   
   
   If the Bluetooth indicator and TV indicator on the top of the bar speaker light up, pairing with the TV is complete.
   
   
   
   Use the TV remote control to select the desired program or connected device input, and check if audio is output from the soundbar.
   

If you pair the soundbar once, you do not need to pair them again.
For information about reconnecting or disconnecting after pairing, refer to the following article.
How can I reconnect my Bluetooth device?