ECM-W2BT

The ECM-W2BT features an internal microphone capsule that picks up sounds cleanly and clearly, to deliver a high-quality audio stream. The microphone is also effective at suppressing extraneous noise. 

The omnidirectional microphone picks up sound from all directions. Use the clip to place the microphone near the speaker's mouth, without worrying about which direction it's facing. 

When the ECM-W2BT is used with the compatible camera that supports a Digital Audio Interface, the sound picked up by the receiver is transmitted via a digital signal, enabling low-noise cable-free recording. 

The wind screen that's included with the ECM-W2BT effectively reduces wind noise as well as excessive breath noise. This means you can record clear, stable sound even when shooting outdoors on windy days. 

The unit's sophisticated attenuator function allows you to record loud audio sources at a lower volume or amplify quieter sounds, so you can easily optimise recording levels depending on the circumstances. 

The audio stream is transmitted between microphone and receiver using Qualcomm® aptX™ Low Latency¹ Bluetooth® codec, to provide low latency and prevent loss of sound quality during transmission.  [1] Qualcomm® aptX™ Low Latency¹

Record wirelessly for up to nine hours² when using the ECM-W2BT with a camera that supports power supply via the Multi interface (MI) Shoe. With the compatible cameras, the microphone unit's battery supports nine hours of use, and the receiver unit can operate over nine hours². Battery life of the receiver will be up to three hours² of use, when pairing with cameras which do not support power supply via the Multi Interface Shoe. For compatible cameras, please refer to the link below.

Stable wireless performance provides solid connectivity and greatly reduces the risk of interruption to the audio stream, even in crowded settings with a lot of wireless activity.  [1] Up to 200m (600ft), in locations with good visibility.

With its moisture and dust resistant design⁰, the ECM-W2BT is ready for comfortable use in any environment. The ECM-W2BT incorporates weather-sealed seams and port covers for reliable, interruption-free operation outdoors. 

The microphone is easily expandable via the 3.5mm stereo mini-jack on the transmitter, to give you a clearer, more realistic audio track. You can capture clean stereo sound to make your vlog more flexible and even more impressive when you attach the ECM-LV1 lavalier microphone (sold separately) to the transmitter unit. 

The ECM-W2BT can easily be used to record the voices of two people, the camera operator and the subject, at the same time. With microphones built into both the transmitter and receiver units, the ECM-W2BT is perfect for quick single-operator recording. The audio sources can be mixed and recorded together using the MIX mode.

Use the provided connector protect holder as a microphone stand, setting the mic in a central position. The omnidirectional microphone will capture audio from all participants when you are shooting a group of people. 

The compact size of the ECM-W2BT is perfect for when you're shooting outdoors or on location. At just 27 grams (1.0oz) for the microphone (transmitter) unit and 28 grams (1.0oz) for the receiver, it won't weigh you down during a shoot.

An extensive range of cameras⁰ and other devices can be connected to the receiver portion of the ECM-W2BT. Equipment such as PCs and digital voice recorders¹ that support audio input but don't have a Multi Interface Shoe can be connected via the 3.5mm stereo mini-jack output port on the receiver unit. 

Pairing the ECM-LV1 with the ECM-W2BT is an excellent way to take advantage of the ECM-W2BT's benefits. The super-compact ECM-LV1 can be easily and unnoticeably attached to your subject's clothing, capturing up-close stereo audio that's then transmitted over the long-distance wireless range available to the ECM-W2BT. 

To avoid accidental interruptions during audio recording, the ECM-W2BT is equipped with display lamps that confirm successful operation. The LINK lamp indicates the status of transmission between the microphone and the receiver, and the POWER lamp warns when the remaining battery charge is getting low. 

The ECM-W2BT will free you from worrying about accidental disconnections, handling noise and cable clutter. With the convenient audio and power interface provided by Sony cameras with an MI Shoe, you can enjoy the advantages of a cable-free setup. You can also benefit from improved sound quality through use of the Digital Audio Interface (available on compatible cameras) ensuring pristine digital sound quality. 

A single switch on the receiver makes it easy to select the pickup mode needed for your shoot. There are three pickup modes to choose from, capturing audio from the microphone only, the receiver only, or a mix of both microphone and receiver. 

The ECM-W2BT comes with a connector protect holder that's convenient for carrying the receiver and microphone snugly together. The connector protect holder also doubles as a microphone stand, making it possible to stably set up the microphone when you're using the receiver and microphone paired together as one unit.